Multi-season, water-based antifouling paint for hard- or soft-bottom inflatables.Pettit's Antifouling Paint for Inflatable Boats is a water-based antifouling bottom coating designed to prevent the growth ofall types of saltwater and freshwater fouling. Unlike solvent-based paints, the water-based formula of this paint makes it more pleasant to apply and better for the environment. Along with cuprous oxide to prevent marine fouling, the formula also contains the slicking agent PTFE, which reduces drag for maximum speed and fuel efficiency.Key FeaturesWater-based technology for easy application and cleanupAblative finish reduces coating buildup through controlled erosionWithstands frequent trailering, beaching and launchingContains PTFE for reduced drag and additional speedPhysical DataType: Copolymer ablativeFinish: FlatAvailable Color: Black Components: 1Curing Mechanism: Solvent release Solids by Weight: 73+2%Solids by Volume: 40+2%Coverage: 430sq.ft/gal.VOC: 150 g/l max. (1.25 lbs/gal)Active Ingredients: Cuprous oxide 41%Flash Point: NoneApplicationApplication Method: Brush, roller, airless or conventional sprayNumber of Coats Recommended: 2 minimum, with additional coat at waterline recomendedWet Film Thickness/coat: 3.75 milsDry Film Thickness/coat: 1.5 milsApplication Temperature Min./Max. Range: 50 F. Min. / 90 F. MaxThinner: 97 Epoxy thinner, 120 Brushing thinnerDrying Times* (Hours) Drying @50F @70F @90F To touch 1 hr. 1/2 hr. 1/4 hr. To recoat 4 hr. 2hr. 1 hr. To launch 48 hr. 16 hr. 12 hr.