Buff your boats bottom to an ultra-smooth racing surface.Recommended for use in freshwater on racing hulls, sailboats, runabouts or cruisers, Petit Old Salem Hard RacingCopper Bronze is a good choice for creation of a hard, smooth racing surface. Although Petit Old Salem HardRacing Copper Bronze is not an antifouling paint, it does contain copper flake pigment, which accounts for itscharacteristic bronze hue. It can be buffed to a high gloss for an ultra-smooth racing surface. Excellent fortrailered boats, and suitable for use on fiberglass, wood and steel hulls.Key FeaturesFor dry sailed boats or boats stored in non-fouling fresh waterCan be buffed to give a high gloss, ultra smooth surfaceSuitable for use on fiberglass, wood and steel hullsExcellent for trailered boatsPhysical DataType: Oleoresinous VarnishFinish: GlossyAvailable Colors: BronzeComponents: 1Curing Mechanism: Solvent Release OxidationSolids by Weight: 63 +/- 2%Solids by Volume: 43 +/- 2%Coverage: 800sq.ft/gal.VOC: 450 g/l (3.76 lbs. /gal) as suppliedFlash Point: 106FApplicationApplication Method: Brush, roller, airless or conventional sprayNumber of Coats Recommended: 2Wet Film Thickness/coat: 2.3 milsDry Film Thickness/coat: 1.0 milsApplication Temperature Min. /Max. Range: 50 F. Min. /90 F. Max.Thinner: 121 Spraying Thinner, Model 249995; 120 Brushing Thinner, Model 249961Drying Times* (Hours) Drying @50F @70F @90F To recoat 36 hr. 16 hr. 8 hr. To launch 8-days 4-days 2-days *The above dry times are minimums. May be recoated after the minimum time shown. There is no maximum dry timebefore