Eliminate pitting, dents and gouges with Awl-Fair LW fairing compound.Fill and sand your way to a perfect Awlgrip finish with Awl-Fair LW fairing compound. Awl-Fair LW is an easy-to-sand, premium trowlable product for fairing, leveling or smoothing surfaceimperfections due to gouges, pitting, dents or weld seams.Awl-Fair LW is suitable for both manual and automatic mixing and can be used above and below the waterline.Key FeaturesEasy to sand fairing compound reduces time to job completionSuitable for manual and automatic mixingGreat for smoothing surface imperfectionsPhysical DataType: Two-component epoxyBase Formulation: Epoxy polyamideComponents: 2 (Base and Converter)Finish: SmoothVOC: White Base: 0 g/ltApplicationRecommended Application Method: Trowels, spatula, longboard or putty knifeNumber of coats recommended: As requiredRecommended Wet Film Thickness: 250 milApplication Temperature: Minimum: 77F/25C; Maximum: 95F/35CMix by volume : 1 part D8200 to 1 part D7222Coverage: 1,463sq.ft./gal.Base: AwlGrip (D8200)Fast Converter: AwlGrip (D7222)Cleaner: T0006, T0002, or T0031 ReducersWalk-on time @ 75F/25C/50% RH: 7 hours resistance to foot/treadTime to full cure @ 75F/25C/50% RH:7 daysMore informationFor detailed application instructions, see the AwlGrip LW Fairing Compound DataSheet. NOTE: Manufacturer data sheets are subject to revision. Linked data sheets are believed to be accurate atthe time of publication.